DexterReplacingSdCard
From DaphneWiki
(Difference between revisions)
(→How to use the SD card once you have written an image to it) |
(→How to write the new image) |
||
Line 16: | Line 16: | ||
The procedure for writing the new SD card image will be the same for any Raspberry Pi application. | The procedure for writing the new SD card image will be the same for any Raspberry Pi application. | ||
+ | |||
+ | For Windows, I recommend Win32DiskImager: https://sourceforge.net/projects/win32diskimager/ | ||
Current Pi instructions are : https://www.raspberrypi.org/documentation/installation/installing-images/README.md | Current Pi instructions are : https://www.raspberrypi.org/documentation/installation/installing-images/README.md |
Revision as of 15:40, 9 August 2021
Contents |
Which card to use
I typically ship 32 gig microSD cards with Dexter these days.
https://www.amazon.com/gp/product/B06XWN9Q99/
https://www.amazon.com/gp/product/B073JWXGNT/
Where to get the base image
http://www.rulecity.com/browsetmp/dexterpi-v5.img.7z
You will need to decompress with 7zip ( https://www.7-zip.org/ ).
How to write the new image
The procedure for writing the new SD card image will be the same for any Raspberry Pi application.
For Windows, I recommend Win32DiskImager: https://sourceforge.net/projects/win32diskimager/
Current Pi instructions are : https://www.raspberrypi.org/documentation/installation/installing-images/README.md
Alternate instructions : https://elinux.org/RPi_Easy_SD_Card_Setup#Create_your_own
How to use the SD card once you have written an image to it
- Make sure Dexter's USB drive is inserted into Dexter's Raspberry Pi.
- Insert newly imaged SD card into Dexter's Raspberry Pi.
- Power on. If all goes well, the SD card will setup itself using data from the USB drive and you will be up and running in a few minutes. Dexter's video output will show a progress bar.