DexterReplacingSdCard

From DaphneWiki

(Difference between revisions)
Jump to: navigation, search
(Where to get the base image)
(5 intermediate revisions not shown)
Line 9: Line 9:
= Where to get the base image =
= Where to get the base image =
-
http://www.rulecity.com/browsetmp/dexterpi-v5.img.7z
+
http://www.rulecity.com/browsetmp/dexterpi-v5.img.7z   You may need to right-click to download this on some browsers.
You will need to decompress with 7zip ( https://www.7-zip.org/ ) so that you have a file that ends in ".img" .
You will need to decompress with 7zip ( https://www.7-zip.org/ ) so that you have a file that ends in ".img" .
Line 15: Line 15:
= How to write the new image =
= How to write the new image =
-
The procedure for writing the new SD card image will be the same for any Raspberry Pi application.
+
I recommend https://www.balena.io/etcher/
-
 
+
-
For Windows, I recommend Win32DiskImager: https://sourceforge.net/projects/win32diskimager/
+
-
 
+
-
Current Pi instructions are : https://www.raspberrypi.org/documentation/installation/installing-images/README.md
+
-
 
+
-
Alternate instructions : https://elinux.org/RPi_Easy_SD_Card_Setup#Create_your_own
+
= How to use the SD card once you have written an image to it =
= How to use the SD card once you have written an image to it =
Line 28: Line 22:
# Insert newly imaged SD card into Dexter's Raspberry Pi.
# Insert newly imaged SD card into Dexter's Raspberry Pi.
# Power on.  If all goes well, the SD card will setup itself using data from the USB drive and you will be up and running in a few minutes.  Dexter's video output will show a progress bar.
# Power on.  If all goes well, the SD card will setup itself using data from the USB drive and you will be up and running in a few minutes.  Dexter's video output will show a progress bar.
 +
 +
= A tutorial video showing how to do all of this =
 +
 +
https://youtu.be/-DkdbMFlPVA

Revision as of 22:05, 9 August 2021

Contents

Which card to use

I typically ship 32 gig microSD cards with Dexter these days.

https://www.amazon.com/gp/product/B06XWN9Q99/

https://www.amazon.com/gp/product/B073JWXGNT/

Where to get the base image

http://www.rulecity.com/browsetmp/dexterpi-v5.img.7z You may need to right-click to download this on some browsers.

You will need to decompress with 7zip ( https://www.7-zip.org/ ) so that you have a file that ends in ".img" .

How to write the new image

I recommend https://www.balena.io/etcher/

How to use the SD card once you have written an image to it

  1. Make sure Dexter's USB drive is inserted into Dexter's Raspberry Pi.
  2. Insert newly imaged SD card into Dexter's Raspberry Pi.
  3. Power on. If all goes well, the SD card will setup itself using data from the USB drive and you will be up and running in a few minutes. Dexter's video output will show a progress bar.

A tutorial video showing how to do all of this

https://youtu.be/-DkdbMFlPVA

Personal tools