LD-V6000

From DaphneWiki

Jump to: navigation, search

The LD-V6000's use a straight (NOT NULL) 25-pin serial cable, which is a lot better than the 15-pin cable that the newer Pioneers use. Connecting the LD-V6000 to international portfolio inc your computer is easy because 25-pin serial cables are very common.

http://www.daphne-emu.com/graphics/cstraight.jpg

You'll also need to set the dip switches.

http://www.daphne-emu.com/graphics/ldv6010a.jpg

LD-V6000 Dip Switches
Switches 1-3

000 - 300 bps
100 - 600 bps
010 - 1200 bps
110 - 2400 bps
001 - 4800 bps
101 - 9600 bps

Switch 4

0 - 1 stop bit
1 - 2 stop bits

Switch 5

0 - Parity disable
1 - Parity enable

Switch 6 (apparently ignored if Switch 5 is 0)

0 - Even Parity
1 - Odd Partiy

Switch 7

0 - 7 bit length
1 - 8 bit length

Switch 8

Not used?

Switch 9

0 - No auto-play
1 - Auto-play

Switch 10

0 - Normal mode (use this)
1 - Test mode

LaserAce cable info for the LD-V6000

Not Daphne related but this may be useful

LaserAce Pioneer DB25 Cable

 DB9 Female                DB25 Male
(to LaserAce)       (to Pioneer LD-V6XXX)
Pin 3            to               Pin 2
Pin 2            to               Pin 3
Pin 7            to               Pin 4
Pin 8            to               Pin 5
Pin 6            to               Pin 6
Pin 5            to               Pin 7
Pin 1            to               Pin 8
Pin 4            to               Pin 20
Pin 6   ]   Join
Pin 7   ]   Together
Personal tools