Lv1000

From DaphneWiki

LD-V1000 Undocumented Info

Info not covered in the LD-V1000 manual

Spin-Up Status

Quoted from Ruben from a post to the DLP message board:

"0xfc is the Reject command. Your interface should respond on the next communication cycle with 0x60. The interface will need to continue sending that status until your 4400 has stopped playing the disc, the 4400 tells the interface that its status is stop. Then the interface should provide 0xfc status. The game should respond with 0xfd. On the following communications cycle status will need to be 0x64... continuing until the 4400 is playing the disc and is ready. Then status will need to be 0xe4."

In other words, the LD-V1000 returns status of 0x64 while it is spinning up.

V-Sync

From Ruben: "there's only one game which requires the LD-V1000 communication to be synchronous with actual vsync, and there is a way around that anyhow."