DAPHNE

Hi, Another Tinkering with the DEXTER Ver. 3b Board Test by lord_victorino. The LD-V1000 Boot Switch as described on the DLP Tech Center here: http://www.dragons-lair-project.com/tech/docs/bootswitch.asp can be used to have the DEXTER Ver. 3b Board play the last ldimg file on DEXTER. CONFIRMED! Your...

Hi, FYI. DEXTER USB Drive still having problems. With USB Drive Attached to DEXTER, I get: stat failed with error: Value too large for defined data type Also, while using the Window's DEXTER USB Manager after Matt Ownby's latest fix, I get this Error when I try to update all: Unable to open zip file...

Hi, FYI. I am unable to use my DEXTER Ver. 3b USB Drive into the Pi without getting that same Error when the Game Boots Up, now. But without the USB Drive Installed, DEXTER boots up and works fine playing Only Dragon's Lair. So, I am no better nor any worst off that I was before. Just that DEXTER is...

Hi, Plan 1. Send Tony an updating DEXTER Program with no instructions. Plan 2. See how long it takes for Tony to screw it up. FYI. This was what I got at Plan 2: http://i250.photobucket.com/albums/gg241/lord_victorino/IMG_3961_zps0amfl6gc.jpg Plan 3. See how long it takes for Tony to tinker around w...

Hi Matt, Just that you know, the problem seemed to follow that Hardware. I had this same Problem with all of the Roms, when it was doing it, and not just the DLE 2.1 Roms. So, I knew that it could not be a Rom Problem. Like I said above, I gave my Cable a Re-crimping and the problem is completely go...

Hi Everyone, After re-crimping my Laser Disc Player Connector Cable, I have not had any more issues with the Video Freezing Up. Even when I have swapped Rom Chips, Rom Boards, or Switched Between Roms using the Merlin-1000 Board. So, I am more incline to believe my trouble was with my Cable and not ...

Hi, I asked Shaun Wood to look at the Freeze Frame Bug Video and here was his reply: I just watched the new video of the freeze bug. It's definitely a player return code mis-read. When a search is executed, the player gives a return status code of 0x50 during the search, followed by a 0xD0, when the...

Hi Matt, Below is a Video of the above problem that I talked about before. I did put your Diagnostic Mode to Good use in this Video, as well. I don't know what causes it. But it might be a Merlin-1000 or Compatibility issue between Merlin-1000 and DEXTER. Or still might be a Connection Problem on my...

Hi Everyone, FYI. I got my DEXTER Ver. 3b Prototype Board. I am Testing using one of my Rev. C Logic Boards, In LDV-1000 Mode. using Shuan Wood's Merlin 1000 Rom Board. I also did a quick Test using an Original Rom Board with the DLE 2.0 Roms, as well. And I am using it with a Space Ace Complete Ben...