I have all the files I need but when the game starts it doesn't let me do anything just keeps playing by itself. Seems like there's some setting that I'm missing. I don't know if the game does work just like arcade I mean should there be a flash of light that shows you the correct move and everything like real game.

Any help would be greatly appreciated.

thanks

More info would be helpfull like what does your daphne_log.txt file say?

--DAPHNE version 0.99.6
--Command line is: C:\TEMP\DAPHNE\daphne.exe lairalt vldp -framefile C:\TEMP\DAPHNE\framefile.txt -useoverlaysb -x 640 -y 480
--CPU : AuthenticAMD 1050 MHz || Mem : 512 megs
--OS : Windows 98 || Video : Inno3D GeForce FX 5200
LDV1000 : Instantaneous seeking enabled!
Setting screen width to 640
Setting screen height to 480
Set 640x480 at 16 bpp with flags: 0
Initializing sound system ...
No joysticks detected
Reading key remapping file ... (if the file is corrupt, daphne will crash, just so you know hehe)
Loading roms/lair/dl_a_u1.bin ... 8192 bytes read into memory
Loading roms/lair/dl_a_u2.bin ... 8192 bytes read into memory
Loading roms/lair/dl_a_u3.bin ... 8192 bytes read into memory
Loading roms/lair/dl_a_u4.bin ... 8192 bytes read into memory
Loading roms/lair/dl_a_u5.bin ... 8192 bytes read into memory
Booting ROM ...
LDP : Since disc was stopped, we are flushing the timers (remove me later)
Play
LDP : disc is already playing, play command ignored
Play
Unsupported PR-7820 Command Received: e1
LDP: Playback speed of 1 was requested (ignored)
LDP: Playback speed of 1 was requested (ignored)
Search to 323 received - [25] Attract Mode, Sequence 0 Attract Mode
Play
Unsupported PR-7820 Command Received: e1
Search to 306 received - [25] Attract Mode, Sequence 0 Attract Mode
LDP: Playback speed of 1 was requested (ignored)
Search to 306 received - [25] Attract Mode, Sequence 0 Attract Mode
LDP: Playback speed of 1 was requested (ignored)
Search to 1424 received - [ 0] Introduction, Sequence 0
Play
Search to 1823 received - [ 0] Introduction, Sequence 3
Play
Search to 3561 received - [ 3] Flaming Ropes, Sequence 0
Play
Search to 3963 received - [ 3] Flaming Ropes, Sequence 8 Death Scene
Play
Search to 9965 received - [ d] Flying Horse Barding, Sequence 1 Resurrection Scene
Play
Search to 10021 received - [ d] Flying Horse Barding, Sequence 2
Play
Search to 10565 received - [ d] Flying Horse Barding, Sequence 11 Death Scene
Play
Search to 22682 received - [1f] Underground River, Sequence 1 Resurrection Scene
Play
Search to 22738 received - [1f] Underground River, Sequence 2
Play
Search to 22936 received - [1f] Underground River, Sequence 24
Play
Search to 23938 received - [1f] Underground River, Sequence 16 Death Scene
Play
Search to 24238 received - [1f] Underground River, Sequence 23 Bones Scene
Play
Search to 306 received - [1f] Underground River, Sequence 0 Bones Scene
Freeing memory used to store audio stream...
Shutting down sound system...
Shutting down video display...

As stated to begin with i get no lights telling me where to go and I can't figure out what button 1,2,3 are. one is a sword the other jump????

hope this will help you help me thanks again in advance

Are you running this through dpahneloader or straight from the command line? If from a command line try running it through the loader. Not sure what the lairalt command is. I believe mine is just lair

Yes i was using daphne I have no idea how to run through the comand line. Is there a way to change it

lairalt is the driver (game) name for romsets A-D. This is correct considering his log shows that he is trying to load romset A.

What happens if you try to run F2 roms with the "lair" driver?

OK, just asking..

In DaphneLoader, do you have it set for Free Play "Configure - Game - Freeplay"??

If so, do you just hit "1" to start the game???

I realize it could be key definitions and such, but I like to start low level.


If you have the scoreboard on (overlay), do you see credits and such?

desiv

if I try to run the f2 or the enhancement ones I get the message laserdisc player not found the only one that will run is revision a-D. It almost runs ok but from what I can remember it should help you decide what moves you need to do.

Also if i run the game with free play or any of that i lose the sound for when I make a good move or bad one. The only way that works is if I run it with factory defaults.

nope! Any hints given are animated into the video footage itself. There is no other feedback for DL or SA.



It sounds like you've got some other issues going on. Are you using an unsupported frontend? or Dirk? or Daphneloader? Try running from the commandline and let us know what happens. Instructions for this are detailed in the documentation.

i don't know why but if I set the game setting to phillips laserdisc player it worked great. Now if only space ace world run