I don't remember what it was called. The next time I'm in Fry's, I'll take a look. In the meantime, here's a picture. It's the white connector that the black and red wires are coming out of.
-Jeff "etumor"
| DAPHNE https://www.daphne-emu.com:9443/phpBB3/ |
|
| Using daphne and a DL cab https://www.daphne-emu.com:9443/phpBB3/viewtopic.php?f=2&t=1670 |
Page 1 of 1 |
| Author: | taunt [ Sun Mar 06, 2005 6:08 am ] |
| Post subject: | Using daphne and a DL cab |
OK I hopefully will be getting a DL cab soon. The million dollar question is how might I go about making it into a Daphne cab. Is there a FAQ anywhere I will be buying a Ipac for the controls but as for as what monitor to get to work well with a video card and the scoreboard function I'm clueless any help would be great! Thanks |
|
| Author: | Pinsane [ Wed Mar 09, 2005 3:57 am ] |
| Post subject: | |
If you want to use an arcade monitor you can get an ArcadeVGA card from Ulitmarc or you can just put a regular pc monitor in the cab. You can do a search on MAME and get all kinds of information about monitor/card combinations. |
|
| Author: | etumor [ Wed Mar 09, 2005 7:22 pm ] |
| Post subject: | |
I converted my Dragon's Lair machine into a Daphne cab. For the monitor I used the U3100 from Wells Gardner, which has a VGA interface, so no other special equipment is needed to interface it with the PC. For the scoreboard I purchased a repro scoreboard from ArcadeRenovations.com, which has a built in Serial interface for interfacing with the computer. I still had to manually put together a power plug for the scoreboard (it needs +5V, which can be supplied from the computer power supply). It was a little tricky, but mostly the hard part was just finding the right kind of connector at Fry's. Once I had that, I just had to make sure that I didn't accidentally wire it into the +12V lead from the computer, but I managed to get it right the first time. Depending on what OS you are using, you may need to use the CVS build of Daphne. The current release doesn't support the external scoreboard in Win2000 without special hacks. The CVS build fixes the problem. -Jeff "etumor" |
|
| Author: | taunt [ Thu Mar 10, 2005 5:39 am ] |
| Post subject: | |
Think I might use a happ control 19" SVGA monitor. Dose any sell the scoreboard ribbon cable to lpt port here. I really suck at soldering and might blow up the scoreboard if I attempt it. |
|
| Author: | chip [ Thu Mar 10, 2005 8:36 pm ] |
| Post subject: | |
etumor, do you happen to remember what part you got for the scoreboard power? It would be nice to have a record of it if possible for other users (myself included... hehe) taunt, if you get the repro scoreboard, it has an additional "daphne" connector so you don't need a special cable. A regular PC parallel cable will work fine. If you have an original scoreboard, you will need to make a custom cable as described in the daphne docs. I also have a daphne cabinet, and have set a few up for others as well. I usually use TVs for the monitor. That way it's an easy switch to go between a real LDP and a PC with TV-Out. However, if an LDP is something you know you'll never use, a Happ monitor may be your best bet, although a bit more expensive. Hans Eilers' great monitor/TV swap tutorial just went online at the DLP. Check it out: http://www.d-l-p.com/tech/docs/MonitorSwap.asp =) chip |
|
| Author: | etumor [ Sat Mar 12, 2005 8:14 am ] |
| Post subject: | |
I don't remember what it was called. The next time I'm in Fry's, I'll take a look. In the meantime, here's a picture. It's the white connector that the black and red wires are coming out of. -Jeff "etumor"
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|