Obviously you haven't read any of the documentation. Your log file indicates that you haven't configured mach3 at all.
You have to specify an laserdisc player. Right now you are running Daphne with "noldp" which does nothing.
You can specify a laserdisc in the Daphneloader by clicking on "config."
If you are using an MPEG, you will need to set the laserdisc player to "VLDP," and then specify a framefile. You will also need to make sure that your framefile has been setup properly. Open the Mach3 framefile in a text editor, and look at the first line. It must point to the location where your M2V file is stored. I recommend that you make the first line just a period, then place the file in the same directory as your M2V file. I don't know why more people don't do this, it is the simplest, most straightforward way to do it.
If you have no idea what an M2V or a framefile is, then I suggest reading the documentation (available on this website) before continuing.
-Jeff "etumor" Allen
|