DAPHNE
https://www.daphne-emu.com:9443/phpBB3/

Dragon's Lair / Space Ace HOWTO
https://www.daphne-emu.com:9443/phpBB3/viewtopic.php?f=28&t=3033
Page 1 of 1

Author:  Matt Ownby [ Fri Aug 14, 2015 8:41 pm ]
Post subject:  Dragon's Lair / Space Ace HOWTO

Dip switches and LDP I/O ribbon cable example:

Attachment:
File comment: Dragon's Lair example dip switches which are known to work for LD-V1000 mode using the original ROM board. The LDP I/O cable orientation is also shown.
20150814_133716.jpg
20150814_133716.jpg [ 1.84 MiB | Viewed 13335 times ]


Troubleshooting tips:

- Make sure LDP I/O ribbon cable is not plugged in backward
- If your PCB is revision C, you probably need to be running in LD-V1000 mode. If it is revision A, you need to be running in PR-7820 mode.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/