DAPHNE https://www.daphne-emu.com:9443/phpBB3/ |
|
Dexter 'pulse' light is not blinking https://www.daphne-emu.com:9443/phpBB3/viewtopic.php?f=29&t=3055 |
Page 1 of 1 |
Author: | photoarts1 [ Tue May 24, 2016 2:15 am ] |
Post subject: | Dexter 'pulse' light is not blinking |
Just got Dexter board today, installed it on my DL2 machine. First, a loud pitch was occurring upon start up. There is no blanking on the Board itself even though Dexter board is lighting green and raspberry red. I changed the cable out with a spare I had and now the loud pitch is gone, but upon startup there is nothing on screen just a couple of sequenced beeps. I looked on the DL2 MPU board and noticed 2 red lights on and one green at the same time. What should I look for next to help get all working?? I haven't touched the DL2 machine in a few years since the 1450 player died on me, but it was fully working and I have done nothing to it but swap out new power supply back a few years ago. Any tips?? thanks p |
Author: | Matt Ownby [ Tue May 24, 2016 6:02 am ] |
Post subject: | Re: Dexter not booting with DL2 machine |
photoarts1 wrote: Just got Dexter board today, installed it on my DL2 machine. First, a loud pitch was occurring upon start up. There is no blanking on the Board itself even though Dexter board is lighting green and raspberry red. I changed the cable out with a spare I had and now the loud pitch is gone, but upon startup there is nothing on screen just a couple of sequenced beeps. I looked on the DL2 MPU board and noticed 2 red lights on and one green at the same time. What should I look for next to help get all working?? I haven't touched the DL2 machine in a few years since the 1450 player died on me, but it was fully working and I have done nothing to it but swap out new power supply back a few years ago. Any tips?? thanks p is the 'pulse' LED on the dexter board blinking when dexter is powered on? (does the disc video play just by plugging in dexter when ldp-1450 mode is selected even if it is not plugged into the game via the DB25 port?) |
Author: | photoarts1 [ Tue May 24, 2016 1:54 pm ] |
Post subject: | Re: Dexter not booting with DL2 machine |
On the Dexter board the LED pulse light is not emitting regardless of whether or not data cable is plugged in. Please let me know what to troubleshoot next. thanks p |
Author: | Matt Ownby [ Tue May 24, 2016 2:41 pm ] |
Post subject: | Re: Dexter not booting with DL2 machine |
photoarts1 wrote: On the Dexter board the LED pulse light is not emitting regardless of whether or not data cable is plugged in. Please let me know what to troubleshoot next. thanks p I just filmed a little video on my camera showing what to check to solve this. Uploading it to youtube now. |
Author: | Matt Ownby [ Tue May 24, 2016 2:59 pm ] |
Post subject: | Re: Dexter not booting with DL2 machine |
Try this |
Author: | photoarts1 [ Wed May 25, 2016 3:17 am ] |
Post subject: | Re: Dexter 'pulse' light is not blinking |
Did everything you suggested and after swapping cord inputs on raspberry several times, finally got it to work! Unit is a little finicky, but once it starts working, all is fine! Many thanks for the help! Now how do I go about getting a copy of Cliffhanger for the device? thanks p |
Author: | Matt Ownby [ Wed May 25, 2016 4:15 am ] |
Post subject: | Re: Dexter 'pulse' light is not blinking |
photoarts1 wrote: Did everything you suggested and after swapping cord inputs on raspberry several times, finally got it to work! Unit is a little finicky, but once it starts working, all is fine! Many thanks for the help! Now how do I go about getting a copy of Cliffhanger for the device? thanks p where's the video so we can rejoice in your success? |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |