DAPHNE
https://www.daphne-emu.com:9443/phpBB3/

To heat sink or not to heat sink?
https://www.daphne-emu.com:9443/phpBB3/viewtopic.php?f=29&t=3076
Page 1 of 1

Author:  Bumblebrow [ Sun Jul 24, 2016 4:20 am ]
Post subject:  To heat sink or not to heat sink?

I was just wondering if it is recommended to heat sink the Raspberry PI board? If this configuration is going to replace the LD player and run continuously, would be be advantageous to install heat sinks on the two main chips?

Author:  Warren Ondras [ Mon Jul 25, 2016 2:08 am ]
Post subject:  Re: To heat sink or not to heat sink?

My understanding is that in general, unless you are overclocking, heat sinks for the Pi are not necessary. Dexter doesn't use overclocking, and the CPU utilization is not maxed out, so the CPU isn't working particularly hard.

Even with the slightly elevated temperature in an arcade game cabinet, I wouldn't expect heat to be a problem.

Author:  shenlung [ Tue Jun 12, 2018 11:34 pm ]
Post subject:  Re: To heat sink or not to heat sink?

I put a small adhesive heatsink on Pi CPU. I noticed when running the ALG multigame I built in our wherehouse when it was very hot and no AC, the video started glitching and slowing down. The Pi throttles clock speed if it gets hot I think. You can get small adhesive square heatsink at Mouser.

Author:  Matt Ownby [ Wed Jun 13, 2018 7:15 pm ]
Post subject:  Re: To heat sink or not to heat sink?

shenlung wrote:
I put a small adhesive heatsink on Pi CPU. I noticed when running the ALG multigame I built in our wherehouse when it was very hot and no AC, the video started glitching and slowing down. The Pi throttles clock speed if it gets hot I think. You can get small adhesive square heatsink at Mouser.


awesome tip! thanks for sharing!

Author:  Matt Ownby [ Mon Aug 27, 2018 5:54 pm ]
Post subject:  Re: To heat sink or not to heat sink?

shenlung wrote:
I put a small adhesive heatsink on Pi CPU. I noticed when running the ALG multigame I built in our wherehouse when it was very hot and no AC, the video started glitching and slowing down. The Pi throttles clock speed if it gets hot I think. You can get small adhesive square heatsink at Mouser.


This issue may have come up again. Do you have a link to the Mouser part that you used successfully?

Author:  Karenecown [ Wed Oct 16, 2019 7:01 pm ]
Post subject:  To heat sink or not to heat sink

Was going to run a couple of laptop benches with a 2670QM

cant find it on the bot ........ anybody know whats up ?

And how to get it added if indeed it is not there ?

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/