This is for Esh's Aurunmilla which is on the DVD in my D: drive. The Daphne emulator is on the PC desktop. I have the frame file saying:
D:\Esh's Aurunmilla\
27 esh.m2v
Then the Error Message in the Daphne_Log.txt file shows this:
--DAPHNE version 0.99.7cvs
--Command line is: C:\Documents and Settings\eoc\Desktop\daphne\daphne.exe esh vldp -framefile C:\Documents and Settings\eoc\Desktop\daphne\roms\esh\eshframe1.txt -blank_skips -blank_searches
--CPU : AuthenticAMD 900 MHz || Mem : 640 megs
--OS : Windows NT/2000 || Video : MSI MS-StarForce GeForce4 MX 440 (NVIDIA GeForce4 MX 440)
Set 640x480 at 32 bpp with flags: 0
Initializing sound system ...
Joystick #0 was successfully opened
Loading roms/esh/h8_is1.bin ... 8192 bytes read into memory
Loading roms/esh/f8_is2.bin ... 8192 bytes read into memory
Loading roms/esh/m3_a.bin ... 4096 bytes read into memory
Loading roms/esh/l3_b.bin ... 4096 bytes read into memory
Loading roms/esh/k3_c.bin ... 4096 bytes read into memory
Loading roms/esh/j1_rgb.bin ... 512 bytes read into memory
Loading roms/esh/c5_h.bin ... 256 bytes read into memory
Loading roms/esh/c6_v.bin ... 256 bytes read into memory
Could not open mpeg frame conversion file : C:\Documents and Settings\eoc\Desktop\daphne\roms\esh\eshframe1.
Could not open frame file!
You must specify a -framefile argument when using VLDP.
If you didn't, then this is the problem.
Could not initialize laserdisc player!
Shutting down sound system...
Shutting down video display...
What am I doing wrong to not get the Emulator to work?