Dragon's Lair / Space Ace HOWTO

Post Reply
Matt Ownby
DAPHNE Creator
DAPHNE Creator
Posts: 839
Joined: Sat Jan 20, 2001 1:00 am
Location: Salt Lake City,Utah, USA
Contact:
Contact Matt Ownby

Dragon's Lair / Space Ace HOWTO

Post by Matt Ownby »

Dip switches and LDP I/O ribbon cable example:
Dragon's Lair example dip switches which are known to work for LD-V1000 mode using the original ROM board. The LDP I/O cable orientation is also shown.
Dragon's Lair example dip switches which are known to work for LD-V1000 mode using the original ROM board. The LDP I/O cable orientation is also shown.
20150814_133716.jpg (1.84 MiB) Viewed 27936 times
Troubleshooting tips:

- Make sure LDP I/O ribbon cable is not plugged in backward
- If your PCB is revision C, you probably need to be running in LD-V1000 mode. If it is revision A, you need to be running in PR-7820 mode.
Check out my cool projects!
Top
Post Reply

Return to “Guides and Announcements”