Page 1 of 1

error: transport endpoint is not connected

Posted: Fri Feb 09, 2018 8:49 pm
by Matt Ownby
27990117_10211168982649116_1648766376_o.jpg
27990117_10211168982649116_1648766376_o.jpg (163.29 KiB) Viewed 23055 times
Several people have reported this error to me. If you see it, it's caused by a problem with Dexter's raspberry pi communicating with the inserted USB drive. To workaround it, just eject the USB drive and keep it near by. It is only needed for updates so you can leave it ejected for daily operation.