Dexter Boot Issue

Post Reply
knohbody
Registered User
Registered  User
Posts: 3
Joined: Sun Jan 19, 2020 4:08 pm

Dexter Boot Issue

Post by knohbody »

Hi,

I've got a dexter installed in a Dragons Lair 2 cabinet. Everything seems to be set up correctly and it runs the game correctly when it boots. However, nearly every time I turn the power off and come back later to turn it back on, the raspberry pi command prompt is on screen, with rsync errors (directory new_sys_files, software caused connection abort) (code 23 at main.c 1070, sender 3.0.9), transport endpoint not connected errors (start line 19 and line 33) and an exec error at line 33.

(I typed out the exact errors, but could not post, as it was too spammy for a new user)

When this happens, resetting the entire machine will usually get me back into the game with everything working, though I sometimes have to do this more than once. Clearly, somethings not loading correctly on the raspberry pi side. Any suggestions?

Thanks!
Matt Ownby
DAPHNE Creator
DAPHNE Creator
Posts: 839
Joined: Sat Jan 20, 2001 1:00 am
Location: Salt Lake City,Utah, USA
Contact:

Re: Dexter Boot Issue

Post by Matt Ownby »

Is this the issue?

viewtopic.php?f=29&t=3149
Check out my cool projects!
knohbody
Registered User
Registered  User
Posts: 3
Joined: Sun Jan 19, 2020 4:08 pm

Re: Dexter Boot Issue

Post by knohbody »

Seems likely. Apologies, I did search for answers and try to read through the forums before posting, but must have missed this.

I'll pull the USB drive and see what happens tomorrow morning. Thanks!
knohbody
Registered User
Registered  User
Posts: 3
Joined: Sun Jan 19, 2020 4:08 pm

Re: Dexter Boot Issue

Post by knohbody »

Ok, removing the USB seems to have solved the issue. Thanks Matt!
Post Reply